[00:00.000 --> 00:05.020] Old gear box plate on the right, new gear box complete on the left.
[00:05.680 --> 00:15.660] Here I'm transferring the mounting screw adjustments that tweak the angle of the lower wheel.
[00:16.360 --> 00:22.540] Since these are already good, just by measuring like this off this boss that holds the axle of the main wheel.
[00:23.060 --> 00:25.720] By measuring all three of these, that one back there.
[00:25.720 --> 00:31.540] And transferring those same measurements off of here onto these set screws, which are a very snug fit in the whole.
[00:31.560 --> 00:38.220] I will maintain the alignment of the rear wheel good enough to not have to do any tweaking.
[00:38.540 --> 00:43.260] Roland saw doesn't recommend any kind of heavy open gear grease or anything in this area.
[00:44.360 --> 00:50.500] I mentioned to him about just putting a light coat of moly coat GN, molybdenum disulfide assembly paste.
[00:51.300 --> 00:57.360] Just enough to wet the flanks a little bit, wipe all the excess off the OD and face of both gears.
[00:57.960 --> 01:04.540] And we'll give that a try, because the chips get down in here, and when the open grease is going to collect chips and drag them through the mesh.
Some Rollin Saw gearbox replacement tips.
#rollinsawenvy #practitioner_of_the_mechanical_arts #dontleavewellenoughalone #thinkoutsidethebox #instamachinist #instatoolmaker #instaengineer #engineer #engineering #toolmaker #biaxclone #scraping #autoharig #rebuilding
This site came about as a way to easily search for and find a specific Robin Renzetti post, or a specific series of robin's excellent #descriptionInAudio instagram posts, making them searchable not only by the description, but by a transscript of the audio within them.
You can search by the searchbar above, and click the sitemap link below and use ctrl+f to search directly if the google results are not to your liking.
With the help of: Jdownloader 2 - OpenAI Whisper - Whisper-standalone-win - Contact: Echo51@DiscordSitemap for Ctrl+F search